Skip to content

Serving 28 Middle Tennessee cities Free photo estimates, in writing

New Stucco Installation

One pass, done right.

A fiber-reinforced, factory-blended cement stucco applied in a single, thicker coat over lath or masonry, with a fast schedule and a finish that is color-fast and consistent.

  • Typical thickness: About three-eighths to one-half inch
  • Coats: One thick coat plus finish pass
  • Color: Integral or painted
Size up the wallTry the Stucco Cost Estimator
One-Coat Stucco Systems in Nashville, TN by Music City Stucco across Middle Tennessee
Faster build, same cement strength.
The overview

What it is, and why it matters.

One-coat stucco is a premixed, fiber-reinforced cement product that is applied once, at a thickness near half an inch, instead of building three separate coats. Because it is blended at a plant, the mix is consistent from bag to bag, and the schedule is shorter since there are fewer coats to cure between.

It still needs the same bones as any good wall: a proper weather barrier, correctly fastened lath or a sound masonry base, a weep screed and control joints. We use one-coat on many Nashville new builds and additions where speed and consistency matter, and we tell you honestly when a project would be better served by the traditional three-coat build.

Why owners choose it

Four things done right.

Consistent mix

Premixed material means the same strength and color batch after batch.

Faster schedule

Fewer coats to cure keeps the crew moving and the house closed in sooner.

Integral color option

Color goes through the wall, so small chips do not show a gray base.

Honest fit check

We tell you when three-coat or another system is the better answer.

How it goes

From first call to one-coat stucco.

  1. 01

    Check the base

    Framing, sheathing and openings are checked and corrected first.

  2. 02

    Barrier and lath

    Weather barrier, flashing, lath and accessories are installed.

  3. 03

    Apply and float

    The one-coat mix is applied, leveled and floated to texture.

  4. 04

    Cure and finish

    The wall is cured and the final color or coating is confirmed.

Where we do it

One-Coat Stucco across Middle Tennessee.

We do this work in 28 cities, from downtown Nashville to Franklin, Murfreesboro, Hendersonville and Dickson.

Good questions

One-Coat Stucco: common questions

Is one-coat stucco as strong as three-coat?

When installed to the manufacturer's instructions over proper lath and a barrier, one-coat performs well. It is thinner than a traditional three-coat wall, so the preparation matters even more.

Can one-coat be colored?

Yes. Many one-coat products accept integral color, and a finish coating or paint can be added later.

How do I get a price for one-coat stucco?

Fill in the form or call or text 615-357-7797, ideally with a photo. We confirm what is involved and send a written price, and larger jobs get a free site visit.

Ready to talk about one-coat stucco?

A photo or a free visit, and a written price. A real person calls back, usually the same day.

Free estimate

Let's look at your wall.

Tell us what you see or what you want built. A real person reads every message and calls back, usually the same day, with straight answers and a written, itemized price.

  • A photo estimate or a free visit: we look at the wall, the details and the water
  • Honest advice on repair, recoat or replace, and the right system for your building
  • A written price with the system, coats, finish and scope spelled out
Prefer to talk? Call or text615-357-7797

Your free estimate

We only use your details to respond to your request.